Help
how do you convert a gmax building into a shp?
Page 1 of 1
gmax help
Rate Topic:
Promote to Article
#2
-= Nameme99 =- 
- CnC-Source Staff
-
- Group: Network Mod Staff
- Posts: 489
- Joined: 25-May 05
Posted 06 May 2006 - 10:55 PM
You can't. simple as that
#3
CommandoSR
- Rambo
-
- Group: Network Mod Staff
- Posts: 821
- Joined: 05-August 03
Posted 07 May 2006 - 02:10 AM
It's going to be a complicated process. First you need to have the model correctly aligned, then you take a screenshot of the model and remove the background.
#4
ionkill43
- AR Member
-
- Group: VIP Member
- Posts: 186
- Joined: 22-September 05
Posted 07 May 2006 - 04:22 PM
If its a building it shouldn't be to hard cause RA2 only needs one screen shot. Do it in W3D veiwer and make the background blue and screen shot there. Make sure you convert the gmax file to W3D with RenX.Zoom out a bit far so your building isn't huge and postion it the way you want it.(probably the roof showing with the front and I bit of the side so it dosen't look 2D.)
#5
-= Nameme99 =-
- CnC-Source Staff
-
- Group: Network Mod Staff
- Posts: 489
- Joined: 25-May 05
Posted 07 May 2006 - 07:25 PM
Never heard of doing that...
#6
Ux2
- Commando
-
- Group: Members
- Posts: 177
- Joined: 06-October 05
Posted 08 May 2006 - 07:18 AM
well I got it to work and with an easy program by somone named flyby it gets the camera in perfect place and it lights it good 
here is a building I made
power_turbines.PNG (6.21K)
Number of downloads: 13
here is a building I made
power_turbines.PNG (6.21K)
Number of downloads: 13
Share this topic:
Page 1 of 1